Dynafluid Water Guns.

The Dynafluid range of water guns combine years of experience as one of the leading suppliers of wash-down systems throughout the world. Whichever model you choose, you're sure of top quality, with full service support to ensure many years of productive life from your Dynafluid water gun.


With a precise, controllable water jet pattern and absolute cut-off on release of the trigger, there's no wasted water outside of the target area and no leaks. Tests have shown that water and energy savings of as much as 80% are possible compared to less sophisticated washdown methods. What's more, the operator does not have to walk back to the control valve or tap to stop the water flow, which saves valuable time and effort.


All of the guns give one-handed use. The water guns are a favourite with operators, who appreciate the balanced design and shock-resistant thick rubber cover, which is ideal for the toughest of industrial environments.


The Dynafluid industrial water guns are available as standard in bronze with a choice of black or white rubber covers. For hygienic applications in food processing or pharmaceuticals or where de-ionised water or corrosive fluids are used, models are available with stainless steel bodies and internals.

Adjustable water pattern

The operator can change the water pattern simply by adjusting the trigger position. A partial squeeze gives a wide drenching spray, for wetting large surfaces. The spray can be narrowed by applying a further squeeze. A full squeeze produces a concentrated jet, which is more effective in removing stickier and heavier substances.

Watergun Lance

The ideal choice for wash-down areas with difficult to reach corners and crevices. The adjustable grip is heat insulated for comfortable two-handed usage. As standard, the nozzle gives a concentrated jet, with other nozzle/water jet designs being available. As with all Dynafluid guns, the trigger-operated design gives absolute cut-off once the trigger is released. The gun is available in bronze or stainless steel, with the lance in stainless steel.

Choose from either front or rear trigger. Both guns come in 3 versions
Watergun (516) Rear Trigger
  • Mk. 2 with 8mm (5/16”) orifice
  • Mk. OH with 11mm (7/16”) orifice
  • Mk. MV with 14mm (9/16”) orifice

Available in stainless steel as an option.

Spitzpistol (522) Front Trigger
  • Mk. 78 with 8mm (5/16”) orifice
  • Mk. 80 with 11mm (7/16”) orifice
  • Mk. 82 with 14mm (9/16”) orifice
Flowrates (sizes/flowrates applicable to both front and rear trigger guns)
  • 8mm - 16 l/min @ 3 bar
  • 11mm - 38 l/min @ 3 bar
  • 14mm - 52 l/min @ 3 bar